Exoskeleton-type medical rehabilitation system with embedded sensors, designed using digital-twin solutions
Keywords:
exoskeleton, digital twin, sensorsAbstract
INTRODUCTION: Exoskeleton-type medical rehabilitation systems are the main solution for recovery of the mobility of patients affected by strokes, spinal cord injuries, or muscular atrophy. These systems feature detection and actuation components, such as sensors and actuators, whose typology and integration are essential for the device's ability to withstand wear under intensive use conditions.
OBJECTIVES: To increase the lifespan of exoskeletons, the main objective of the project presented in this article is to integrate sensors into the exoskeleton’s structure, for them to be better protected from external factors, such as shocks or moisture.
METHODS: A virtual model of an exoskeleton component for the lower limb that ensures the plantar flexion (movement of the sole), made of polyurethane, was designed using a digital-twin modelling solution, namely the SolidWorks Simulation software. Our choice was motivated by the fact that the use of digital twin solutions allows functional testing, by simulating the impact factors existing in real systems, of the exoskeleton with embedded sensors, by coating with polyethylene and ethylene vinyl acetate (EVA) layers. Thus, it will be possible to observe the inconsistencies and defects that can appear on the surface of the materials used and to determine the best choice of material that can protect against wear.
RESULTS: The values of all parameters analyzed following the simulations demonstrate that polyethylene and EVA are materials that can be used to embedd sensors into the structure of exoskeletons. Layers with thicknesses of 0.5 mm, 1 mm, and 1.5 mm are resistant and display stable structures during the patient's walking, thus protecting the sensors integrated into a lower limb exoskeleton from wear factors.
CONCLUSION: Following the comparative analysis of the results obtained from testing by digital simulations, the main conclusion is that the 1.5 mm thick ethylene vinyl acetate layer is the one that presents superior tribological properties, being the most useful for application in real systems.
References
[1] Shushtari M, Arami A. Human-exoskeleton interaction force estimation in indego exoskeleton. Robotics. 2023; 12(6): 66.
[2] Chang SR, Kobetic R, Audu ML, Quinn RD, Triolo RJ. Powered lower-limb exoskeletons to restore gait for individuals with paraplegia – a review. Case Orthop. J. 2015; 12(1):75–80.
[3] Zhao X, Tan X, Zhang B. Research progress and key technology analysis of flexible lower limb exoskeleton robots. Robot. 2020; 42(03): 111–130
[4] Hillman, M. Rehabilitation Robotics from Past to Present – A Historical Perspective. In: Bien, ZZ, Stefanov D (editors) Advances in Rehabilitation Robotics. Lecture Notes in Control and Information Science, vol 306. Springer, Berlin, Heidelberg; 2006, p. 25-44.
[5] Cai VAD, Bidaud P, Hayward V, Gosselin F, Desailly E. Self-adjusting, isostatic exoskeleton for the human knee joint. In Conference proceedings of the 33th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society, August 2011, Boston, Massachusetts USA; 2011. p. 612-618.
[6] Yang CJ, Zhang JF, Chen Y, Dong YM, Zhang Y. A review of exoskeleton-type systems and their key technologies. Proc. IMechE Part C: J. Mech. Eng. Science. 2008; 222: 1599-1612.
[7] Preethichandra DMG, Piyathilaka L, Sul JH, Izhar U, Samarasinghe R, Arachchige SD, de Silva LC. Passive and active exoskeleton solutions: sensors, actuators, applications, and recent trends. Sensors. 2024; 24(21): 7095.
[8] Kashyap A, Arun Kumar MR, Chobey A, Kumar AA, Patil GG. Exoskeleton. Int. J. of Eng. Res. in Mech. and Civil Eng. 2016; 3(7): 88-95.
[9] Maziz A, Concas A, Khaldi A, Stålhand J, Persson NK, Jager EWH. Knitting and weaving artificial muscles. Science Adv. 2017; 3(1): e1600327.
[10] Abayadeera MR, Ganegoda GU. Digital twin technology: a comprehensive review”, Int. J. Sci. Res. Eng. Trends. 2024; 10(4): 1485-1506.
[11] Jones D, Snider C, Nassehi A, Yon J, Hicks B. Characterising the digital twin: a systematic literature review. CIRP J. Manuf. Sci. Technol. 2020; 29: 36-52.
[12] Mathivanan S, Mohan R, Panda RC, Balachander P. Studies on compressive loading-characteristics of PU foam materials used in footwear for obese”, J. Polym. Mater. 2022; 39(3-4): 195-204.
[13] Yamaguchi T, Pathomchat P, Shibata K, Tateishi J, Hokkirigawa K. Effects of porosity and SEBS fraction on dry sliding friction of EVA foams for sports shoe sole applications. Tribol. Transactions. 2020; 63(6): 1067-1075.
[14] Jar PYB, Adianto R, Muhammad S. A mechanistic approach for determining plane-stress fracture toughness of polyethylene. Eng. Fract. Mech. 2010; 77(14): 2881-2895
[15] Cunha Jr A, Yanik Y, Olivieri C, da Silva S. Tresca vs. von Mises: Which failure criterion is more conservative in a probabilistic context? J. Appl. Mech. 2024; 91: 111008.
[16] Horwood A, Chockalingam N. Clinical biomechanics in human locomotion origins and principles. 1st edition. Academic Press; 2023. Chapter 2, Principles of materials science; 91-174.
[17] Asgari M, Kouchakzadeh MA. An equivalent von Mises stress and corresponding equivalent plastic strain for elastic–plastic ordinary peridynamics. Meccanica. 2019; 54: 1001–1014.
[18] Mengüç Y, Park YL, Pei H, Vogt D, Aubin PM, Winchell E, Fluke L, Stirling L, Wood RJ, Walsh CJ. Wearable soft sensing suit for human gait measurement. Int. J. Robotics Research. 2014; 33(14): 1748-1764.
[19] Feng YQ, Chen XY, Zhang CY, McCoul D, Huang B, Zhao JW. Soft capacitive force sensors with low hysteresis based on folded and rolled structures”, IEEE Robot. Autom. Lett. 2022; 7(4): 11158-11165.
[20] Ghazali MJ, Ren X, Rajabi A, Zamri WFHW, Mustafah NM, Ni J. Finite element analysis of cushioned diabetic footwear using ethylene vinyl acetate polymer. Polymers. 2021; 13(14): 2261.
[21] Dong TY, Guo Y, Gu Y, Wang L, Liu T, Wang XR, Li PJ, Li XQ. Design of a wireless and fully flexible insole using a highly sensitive pressure sensor for gait event detection. Meas. Sci. Technol. 2021; 32(10): 105109.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Liliana-Laura Badita-Voicu, Adrian Catalin Voicu
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This is an open access article distributed under the terms of the CC BY-NC-SA 4.0, which permits copying, redistributing, remixing, transformation, and building upon the material in any medium so long as the original work is properly cited.
