A novel concept of solar photovoltaic partial shading and thermal hybrid system for performance improvement

Usha S; Geetha P; Geetha A; Balamurugan K S; Selciya Selvan

doi:10.4108/ew.4943

Authors

Usha S SRM Institute of Science and Technology
Geetha P Karpaga Vinayaga College of Engineering and Technology
Geetha A SRM Institute of Science and Technology
Balamurugan K S Karpaga Vinayaga College of Engineering and Technology
Selciya Selvan Karpaga Vinayaga College of Engineering and Technology

DOI:

https://doi.org/10.4108/ew.4943

Keywords:

Solar Irradiation, Solar Panel, High-frequency inverter, Partial Shading module, Bypass Diode, photovoltaic Thermal Hybrid Solar Panel, Wireless power transmission

Abstract

Large values from external causes, such as partial shade, can greatly influence output power of PV. The applications of partial shading are frequently utilized in simulation software. However, in this research work, partial shading and the integration of the photovoltaic Thermal (PV/T) Hybrid Solar Panel is implemented, and analysis is done to see how it affects the output power of solar panels under genuine climatic circumstances. Many research investigations have been conducted and researchers continue to look at PV/T systems to enhance their performance. The application is designed to provide information on solar panel output power under normal and partial shading situations. The maximum amount of power that solar panels can generate is 298.50 W. Under typical circumstances, partial shading in a solar panel can result in a maximum power value of 141.13 W, and this partial shading leads the power to increase.

Downloads

Download data is not yet available.

References

Gunerhan, H, Hepbasli, A, Giresunlu, U. Environmental impacts from the solar energy systems: Energy Sources A: Recovery Util. Environ. Eff. 2008; 31(2): 131–138. DOI: https://doi.org/10.1080/15567030701512733

Shmilovitz, D, Levron, Y. Distributed maximum power point tracking in photovoltaic systems-emerging architectures and control methods: Energies. 2017; 53(2): 142–155. DOI: https://doi.org/10.7305/automatika.53-2.185

Sai Krishna, G, Moger, T. Optimal Su Do Ku reconfiguration technique for total-cross-tied PV array to increase power output under non-uniform irradiance: IEEE Trans. Energy Convers.. 2019; 34(4):144-153. DOI: https://doi.org/10.1109/TEC.2019.2921625

Kazem, H, A, Khatib, A, Sopian, K. Sizing of a standalone photovoltaic/battery system at minimum cost for remote housing electrification in Solar: Energies. 2013; 61:108–115. DOI: https://doi.org/10.1016/j.enbuild.2013.02.011

Khatib, T, Elmenreich, W. Modeling of photovoltaic systems using Matlab: Int. J. Renew. Energy Res.. 2016; 15(1): 121-127. DOI: https://doi.org/10.1002/9781119118138

Bharadwaj, P, John, J. Subcell modeling of partially shaded solar photovoltaic panels. Solar Energy: Energies. 2017; 55(3): 61-69. DOI: https://doi.org/10.1109/ECCE.2017.8096758

Díaz-Dorado, E, Suárez-García, A, Carrillo, C, Cidras, J. Influence of the shadows in photovoltaic systems with different configurations of bypass diodes: Int. J. Power Electron. Drive Syst.. 2014; 11(3): 134–139.

Gamba, J, C, Romero, A, Hernandez, J. Development of a photovoltaic panel model to find the solar cells optimal reconfiguration under partial shading conditions: Int. J. Nanoparticles. 2015; 14: 126-136. DOI: https://doi.org/10.1109/PVSC.2015.7355827

Landsberg, P, T, Markvart, T. Ideal Efficiencies in Practical Handbook of Photovoltaics: Sustainable Energy Technologies and Assessments. 2022; 27(11): 123-134. DOI: https://doi.org/10.1016/B978-185617390-2/50007-6

Riaz, A, Liang, R, Zhou, C, Zhang, J. A review on the application of photovoltaic thermal systems for building façades: Build Serv Eng Res Technol. 2020; 41(1): 86–107. DOI: https://doi.org/10.1177/0143624419845117

Diwania, S, Agrawal, S, Siddiqui, A, S, Singh, S. Photovoltaic–thermal (PV/T) technology: a comprehensive review on applications and its advancement: IJEE. 2020; 11(3): 33–54. DOI: https://doi.org/10.1007/s40095-019-00327-y

Ahmed, A, J, Hossain, M, S, A, Kazi Nazrul Islam, S, M. Significant improvement in electrical conductivity and Figure of Merit of nanoarchitecture porous SrTiO3 by La doping optimization: ACS Appl. Mater. Interfaces 2020; 12(25): 126-134. DOI: https://doi.org/10.1021/acsami.0c01869

Ahmed, A, J, Nazrul Islam, S, M, K, Hossain, R. Enhancement of thermoelectric properties of La-doped SrTiO3 bulk by introducing nanoscale porosity: Royal Society Open Science. 2019; 6(10): 123-130. DOI: https://doi.org/10.1098/rsos.190870

Al-Waeli, A, H, A, Sopian, K, Yousif, J, H, Kazem, H, A, Boland, J, Chaichan, M, T. Artificial neural network modeling and analysis of photovoltaic/thermal system based on the experimental study: Energy Convers. Manag. . 2019; 186: 368–379. DOI: https://doi.org/10.1016/j.enconman.2019.02.066

Arefin, M, A. Analysis of an integrated photovoltaic thermal system by top surface natural circulation of water: Frontiers in Energy Research. 2019; 7(3): 126-134. DOI: https://doi.org/10.3389/fenrg.2019.00097

Anjum, S, Mukherjee, V, Mehta, G. Modelling and simulation of AdDoKu based reconfiguration technique to harvest maximum power from photovoltaic array under partial shading conditions: Simul Model Pract Theory .2022; 17: 115-140. DOI: https://doi.org/10.1016/j.simpat.2021.102447