Optimized design and application of slot-type solar concentrator based on BIM technology
DOI:
https://doi.org/10.4108/ew.7308Keywords:
BIM technology, Trough condenser, Steel consumption, Structural stress, Mirror displacement, solar energy, Structural designAbstract
The application of BIM (Building Information Modeling) technology allows designers in the construction industry to complete their design work with lower energy consumption and higher efficiency and is therefore increasingly being used in other design fields. In this study, a finite element model of the concentrator was constructed using BIM technology to reduce the amount of steel used in the manufacture of the trough solar concentrator and thus reduce its production cost, and static analysis and steel minimization planning analysis was conducted. The analysis results show that the multiple linear regression algorithm is more reasonable to calculate the structural optimization evaluation index. The steel consumption of the *02 solution is lower, and the lowest values are 805. 962 kg and 3974. 9¥ for the total steel consumption and steel cost, respectively, which is 10. 99% lower than the steel cost of 4465. 5¥ for the concentrator before optimization. Although its maximum displacement and maximum stress are not the lowest among the alternatives, they are still far below the corresponding allowable values of the structure, so this solution has the best comprehensive optimization effect. The results of this research show that the application of BIM technology to the design of trough solar concentrators can indeed save equipment production materials and reduce production costs, and has certain application prospects.
Downloads
References
[1] Ebada A, Eltaly B, Tayel M. Advantages of Building Information Modeling Technology (BIM) in Structural Design and Construction Stages. Egypts Presidential Specialized Council for Education and Scientific Research, 2021, 44(4):415-417.
[2] Song A, Cai F, Lei W. Application of BIM Technology in Freezing Design of Metro Section Lateral Pump House. IOP Conference Series: Earth and Environmental Science, 2020, 580 (1):012017-012022.
[3] Gong J, Wang J, Lund P D, et al. Improving the performance of a 2-stage large aperture parabolic trough solar concentrator using a secondary reflector Renewable Energy, 2020, 152(C):23-33.
[4] Zhang X, Cui Z, Zhang J, et al. Optical performance analysis of an innovative linear focus secondary trough solar concentrating system. frontiers in Energy, 2019, 13(3):590-596.
[5] Widjaja A S, K Löwe, Costa F S. Design and simulation of a concentrated solar thermal system with an integrated concrete storage for continuous heat supply. Energy Procedia, 2018, 155 (11):121-135.
[6] Zhou R, Wang R, Xing C, et al. Design and analysis of a compact solar concentrator tracking via the refraction of the rotating prism. Energy, 2022, 251(C):178-192.
[7] Dugaria S, Bortolato M, Col D D, et al. Modelling of a direct absorption solar receiver using carbon based nanofluids under concentrated solar radiation. Renewable Energy, 2018, 128(PB):495-508.
[8] Gang W A, Zhen Z A, Tj A, et al. Thermodynamic and optical analyses of a novel solar CPVT system based on parabolic trough concentrator and nanofluid Case Studies in Thermal Engineering, 2022, 33(5):101948-101965.
[9] Mihaa B, Lh A, Ys A. Advanced Modeling of Nanofluid-Based Solar Receivers in the Concentrated Solar Power Trough to Enhance the Heat Absorptivity. 2021, 7(11):901-920.
[10] Danfulani B I, Mohamed K K A, Khalil I S. BIM collaborative design: a critical perspectives of technology-supported multidisciplinary practice. Bima Journal of Science and Technology, 2024, 8(1b): 64-86.
[11] Patching A, Skitmore M, Rusch R, et al. Case study of the collaborative design of an integrated BIM, IPD and Lean university education program. International Journal of Construction Management, 2024, 24(7): 799-808.
[12] Abbas M A, Ajayi S O, Oyegoke A S, et al. A cloud-based collaborative ecosystem for the automation of BIM execution plan (BEP). Journal of Engineering, Design and Technology, 2024, 22(4): 1306-1324.
[13] Fazeli A, Banihashemi S, Hajirasouli A, et al. Automated 4D BIM development: The resource specification and optimization approach. Engineering, Construction and Architectural Management, 2024, 31(5): 1896-1922.
[14] Zhou L, Kan J, Shi J, et al. The Research on Approach of BIM-Based 3D Design for Transmission Line Project. IOP Conference Series: Earth and Environmental Science, 2021, 719(2):022006-0220014.
[15] Long R, Li Y. Research on Energy-efficient Building Design Based on BIM and Artificial Intelligence. IOP Conference Series: Earth and Environmental Science, 2021, 825(1):012003-012008.
[16] Chen J, Luo Y, Du W. Research on BIM Forward Design Based on Oblique Photogrammetry Reality Model. iOP Conference Series: Earth and Environmental Science, 2019, 267(4): 042100-142109.
[17] Mehrbod S, Staub-French S, Mahyar N, et al. Beyond the clash: investigating BIM-based building design coordination issue representation and resolution. 2019, 24 (3):33-35.
[18] Lobo J, Lei Z, Liu H, et al. Building information modelling- (BIM-) based generative design for drywall installation planning in prefabricated construction. Hindawi Limited, 2021, 2021(7):6638236. 1-6638236. 16.
[19] Lu Y, Shi L. BIM architecture design from the perspective of smart city and its application in traditional residential design. Journal of Intelligent and Fuzzy Systems, 2020, 40(12):1-10.
[20] Carnot P, Ergan S. Owner requirements in as-built BIM deliverables and a system architecture for FM-specific BIM representation. Canadian Journal of Civil Engineering, 2019, 47(2):172-186.
[21] Heaton J, Parlikad A K, Schooling J. Design and development of BIM models to support operations and maintenance. Computers in Industry, 2019, 111(4):172-186.
[22] Ma Z, Liu Z. Ontology- and freeware-based platform for rapid development of BIM applications with reasoning support. Automation in Construction, 2018, 90(JUN.):1-8.
[23] Hollberg A, Genova G, Habert G. Evaluation of BIM-based LCA results for building design. Automation in construction, 2020, 109(Jan.):102972. 1-102972. 9.
[24] Anna G, Giada M, Florian K, et al. The anti-apoptotic Bcl-2 protein regulates hair follicle stem cell function. EMBO reports, 2021, 22(10):52301-52309.
[25] Badiei Y M, Traba C, Rosales R, et al. Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts. ACS Applied Materials & Interfaces, 2021, 13(12):14077-14090.
[26] Alsafouri S, Ayer S K. Review of ICT Implementations for Facilitating Information Flow between Virtual Models and Construction Project Sites. Automation in Construction, 2018, 86(FEB.):176-189.
[27]Sayyad S U, Patil P V, Attar P R. Cost Comparison of a Sewage Treatment Plant Unit by Conventional Method and BIM Approach. ASEAN Engineering Journal, 2024, 14(4): 79-86.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Miaoling Wang, Hao Wang

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This is an open-access article distributed under the terms of the Creative Commons Attribution CC BY 4.0 license, which permits unlimited use, distribution, and reproduction in any medium so long as the original work is properly cited.